MechWarrior Online New Player’s Guide

MechWarrior Online New Player’s Guide by ArchSight

This guide is for new and returning mech pilots to remind themselves how a fully equipped battle mech fights on the field of war in game or real life. You’ll find this guide simple and straight to the point for easy reference. I’ll leave you to fine tune these tactics and strategies in the game because that’s half the fun of being a MechWarrior. I will read my PM’s about this guide so you can talk to me and even suggest putting something in. Please be specific with suggestions about this guide. I will update this guide as much as I can.

Contents:

• Introduction
• Mech Controls
• Graphical User Interface (GUI/HUD)
• General Tactics
• Advanced Tactics
• Destroying Battle Mechs
• Role Warfare
• Specific Battle Mech Weight Class Tactics
• Lone Wolfing
• Team Tactics and Strategies
• Miscellaneous and Sources

Future Content: Disruption/Spoofing, etc.

Introduction

Hi, I’m ArchSight, in the past I piloted all sorts of mechs most notably the SCAT for my crazy kamikaze DFA’s. I was the leader of the Creature MechWarriors in MW4. I’ve played a little bit of MW2, 3, and tesla pod with my friend. Throughout my MechWarrior gaming history I barely relied on my team. I stretched the bounds of how much a single mech can take on alone. Sense, I’m older I see the error’s of my ways back then but also know that sometimes you can’t rely on your team for every moment of the game. You have to add to its success.

MWO Mech Controls

Movement

• “W” Throttle Up
• “S” Throttle Down
• “A” Turn Left
• “D” Turn Right
• “X” Full Stop
• “C” Center Torso
• “TAB” Scoreboard
• “P” Toggle Power
• “O” Override Shutdown
• “SPACEBAR” Jump Jets (Feather the landing by using the jump jets before you touch the ground to avoid damage to the legs.)

Weapons & Targeting

• “R” Target Enemy ‘Mech
• ↑ Move Up Weapon List
• ↓ Move Down Weapon List
• ← Move Left Weapon List
• → Move Right Weapon List
• “RIGHT CTRL” Assign/Un-assign Weapon Group
• “1, 2, 3, 4, 5, 6” Fire Assigned Weapon Group
• “LEFT MOUSE” Fires Vertical Highlighted Weapon Group
• “RIGHT MOUSE” Fires Weapon Group 2
• “BACKSPACE” Chain Fire
• “BACKSLASH” ALPHA strike
• “/” Weapon Cover Toggle

Chat

• “T” All Chat
• “Y” Team Chat

View

• “N” Night Vision
• “Z” Zoom
• “H” Thermal
• “B” Battle Grid
• “LEFT CTRL” Free Look
• “Q” Teammate Information
• “V” Module, Advanced Zoom

Graphical User Interface (GUI/HUD) (Thank you Greyrook for writing this)

DETAILS

SCORE:
In the current Assault Mode, the Score Counter displays the number of mechs killed by friendly units, the game-time remaining, and the number of mechs killed by enemy units. Below this is a meter that shows how long it will take to capture the enemy’s and your bases. As mechs stand in the respective base, these meters will deplete towards the center; once either meter is empty, the game is over and the team whose base remains is the winner.

COMPASS:
This element of the UI provides some of the most dense and useful information, first among which are the base locations. These are indicated by icons shaped like this [-o-], red for the enemy base, teal for your base. Enemy units will also appear as red diamonds if they are spotted by you or your team. Worthy of note, the compass is not a 1:1 readout; i.e. the compass displays about 270° around your mech, rather than the 90° of your viewing angle (credit to Sicarus).

Above the compass, yellow triangles will appear if your torso twist is not aligned with your leg twist.

RETICLE:
The reticle is shown as two parts, the circle in the center represents the trajectory of your arms, the crosshairs represent the trajectory of your torso mounted weapons. Surrounding this are yellow boxes representing your weapon groups. As each weapon group is fired, its associated box will turn red until the weapon recycles or recharges, in which case it will return to yellow. Weapons that are out of ammo will remain red.

Locking targets is done with the circle reticle. If an enemy is spotted by you or your teammates, a red triangle will appear over the mech in your HUD, holding the reticle over this mech and pressing “R” by default will acquire it as your target.

If you have lockable weapons (LRMs or SSRMs), when you hold the circle reticle inside the red box that now appears around the enemy mech 2 concentric, yellow circles will appear around the reticle and spin. Once the circles turn red and stop spinning, that target is locked and missiles will track to it, provided there is no obstruction and you are within the weapon’s effective range. After a lock is acquired, you will have some leeway with maintaining a lock, as long as you pass back over the targeted enemy every second or so, the lock will be maintained until you and your teammates lose line of sight with it.

To the right of the reticle is the distance to target readout. The readout will gauge the distance between your mech and whatever structure/object/patch of ground the arm reticle is currently over.

MECH STATUS:
This is the “paper doll” displaying the health of each component of your mech. See “ENEMY STATUS” for a breakdown.

MINI-MAP:
The mini-map is one of the most important tactical aspects of the HUD. On this, you will see any nearby friendly units as teal arrows (each arrow points towards the mech’s heading). Your mech appears at the center of the map as a yellow arrow that always points towards the bearing of your legs. A dashed white line extends from this arrow to help see this bearing. The top quadrant of the mini-map that is highlighted with white rays extending to the top right and left corners indicates your field-of-view. Your torso heading is always straight up on the mini-map.

In the background, you can see a rough representation of the terrain, which has a labeled grid over-layered on it so you can communicate locations easily to your teammates.

Pressing “B” by default will bring up the Battle Grid, from which a team commander can set waypoints and instructions to the team.

Battle Grid

In the top left corner, you will see a “commander” labeled with a “resign command” button if you have selected the button previously to take command. If you see these items, it means you can add a waypoint to the map which will appear on your team’s compasses and maps. To do this, click a point on the Battle Grid, an “alpha” point should appear. Hover over this point and a series of icons should fade in above the point. Click on one of these icons to make the waypoint appear as that icon. Currently, there is no reward for doing this, and because only a single point can be done at a time it is not very useful. However, this is only the first incarnation, and I hope we can all at least imagine what neat tools this Battle Grid will eventually give us.

WEAPON GROUPS:
This is one of the more difficult interfaces for beginners. The easiest (albeit boring) way to look at it is as a spreadsheet. The rows of this grid are associated with each weapon on your mech (If you have weapons on both arms and torso, arm-mounted weapons will appear at the top; a space will separate these from your torso mounted weapons and the respective reticle element will appear next to each section of rows).

The columns indicate each weapon group you can assign weapons to (1-6, currently). 1 row and 1 column is highlighted, the row highlight is controlled by the up and down arrow keys, the column highlight is controlled by the left and right arrow keys. Within each cell of the spreadsheet there is a number that is either yellow (not in weapon group) or teal (assigned to weapon group). By default, all weapons will be assigned to group 1, so to prevent constant alpha striking, you must move the highlight to each weapon and press the right-control key to toggle that weapon on or off of that group.

To the right of the spreadsheet, there is a meter which acts as the weapon’s recycle timer after it is fired. To the right of that is the weapon name, followed by the remaining ammunition for that weapon (the infinity symbol is used for energy weapons as they do not use ammunition).

MAXIMUM WEAPON’S EFFECTIVE RANGE:
The weapons maximum effective range is listed to remind you how far you can be without reducing your damage with that weapon. The text of the weapon changes colors to let you know how much damage you are doing at the range you are firing. What the colors are is: Green is full damage, yellow is reduced damage, and black will not affect anything at all.

TARGETING (“R” BY DEFAULT. USE IT WELL, AND USE IT OFTEN)

With the current game’s netcode and design, it sometimes takes a few moments for the specific information about a target to appear. However, if you keep an enemy locked, all of this info will show up eventually.

TARGET ARMAMENTS:
Knowing your enemy’s loadout has the potential to win battles for you. For instance, an enemy Awesome could be a medium pulse laser boat capable of tearing you apart at close range. Or, it could just be a stock variant with 3 PPCs which become almost useless at 90m or less. Use this readout to your advantage and as a basis for engaging targets.

TARGET STATUS:
The functionality for this readout is the same as it is for your mech’s status in the bottom left of the screen, where each part’s armor is shown as a outline that fades from bright yellow to orange to red as that part is damaged. Once the part receives enough damage, the outline disappears and damage is then applied to the part itself. If a part is missing, it means it has been destroyed and any weapons/ammunition/jumpjets located on that part will no longer be usable. In the latest patch, completely fresh and undamaged parts appear grey and transparent.

TOTAL REMAINING HEALTH:
This can often be mistaken for “essential” information. While useful in a general sense, it is better to pay more attention to the enemy’s “paper doll” (TARGET STATUS) in the top-right corner. This is because the percentage readout is taking all remaining armor and internal integrity into account, whereas the paper doll will show you exactly which areas have been damaged. If an enemy’s health percentage is particularly low, that enemy has probably caused your team to spend a lot of ammo and time to get it there.

DISTANCE TO TARGET:
The exact distance between your target and the mech. Essential for LRMs as well as just generally maximizing your damage.

TARGET DESIGNATION:
This feature is easily one of the most overlooked UI elements for the casual PUG player. However, as soon as you start playing in a group, this letter becomes your best friend for focusing fire. As each enemy is targeted by you or your teammates, the enemy is assigned a sequential letter from A-H. This lets your team call out targets to watch out for, fire LRMs at, going towards the base, etc. If you are using a Teamspeak/Vent/etc. server to play with your group, it would be prudent to familiarize yourself with the NATO verbal alphabet so you can call out these letters confidently (plus, it just sounds cooler). Here’s the alphabet up to “L” since 12v12 will be the max:

A – Alpha (or Alfa)
B – Bravo
C – Charlie
D – Delta
E – Echo
F – Foxtrot
G – Golf
H – Hotel
I – India
J – Juliet
K – Kilo (pronounced “Key-loh”)
L – Lima (pronounced “Lee-mah”)

General Tactics

Situational Awareness = Situational Awareness is constantly making yourself aware of enemy and friendly activity by looking outside of the mech cockpit, listening, looking at the mini-map/radar, and checking the battle grid with the “B” key for waypoints from your commander. There is a legend inside of the battle grid that explains the different kinds of waypoints. Staying situational aware keeps you on guard and in the know.

Assess Enemy Vulnerability = This is when you see the enemy and decide on what to do. How many are there? What mechs are they using? Have they been damaged? How much armor do they have in each section of their mech? What positions are they in? What kind of environment is nearby? Do they see me? Do I have enough help? Should I run, fight, watch, or hide?

Heat Management = Heat Management is managing the amount of heat buildup the mech is taking from firing its weapons. To effectively manage heat buildup use group firing to fire weapons at different times by using the “right Ctrl” and arrow keys to select weapons into one of the six firing groups. Split up energy and missile/artillery weapons because they produce the most heat when fired. The engine of your mech produces heat when you increase movement speed so if you want to help cool down your mech slow down. Don’t rely on the shut down over ride or you’ll blow yourself up in no time by pressing the “O” key too many times. You should only use over ride to run away to somewhere else to cool off or maintain maneuverability instead of being dead center of your enemy’s line of sight.

Piloting a mech into an ocean, lake, or river is an effective way of cooling down a mech. Also avoid environmental dangers like volcanic activity that can slowly increase the amount of heat build up your mech is taking. The maps affect heat build-up differently so be mindful of the increased heat or decreased heat your mech is taking while on the various maps. Do a weapons check by firing your weapons while not in battle and make note of the percentage of heat build-up that your weapons has caused so you can know when to fire while keeping your mech from overheating up to 100% or over.

Move out of Targeting = Don’t stop moving because that will make the mech an easier target to shoot. Enemy mech pilots have to compensate constantly in order to hit a moving target. Avoid attacking straight on or into large groups; attempt to circle strafe the enemy, feint left to right, or break their line of sight.

Pivot to Fire = When you’re going to fire your weapons while maneuvering cut your throttle to a lower speed. This will increase your accuracy and chance of keeping your reticules on target while you’re moving. This also enables you to take tighter turns.

Take Cover = Use the environment of the map to prevent taking more damage than you have too by going behind buildings, trees, hills, mountains and other mechs, etc. Effectively using cover can prevent you from being focus fired by the opposite team. Cover is also very useful for taking yourself off missile lock when you’re out of view of enemy players. Shutting down with the “P” key can also remove missile lock while not overheated but missiles will home into the last known location of your mech. Missiles can re-acquire lock when your mech is powered up.

Alpha Strike = The Alpha strike is when a mech fires all of its weapons at the same time in a group or with the use of the “BACKSLASH” key. This is the fastest way to do damage to an enemy mech but also the most risky way. It’s risky because a mech can suddenly explode from the heat buildup of shooting so many weapons or just over heat into a shut down. Also, the mech could miss the target. Only use Alpha strikes when there’s time to wait for the heat to go away and the weapons to fire again.

Melee = clank, boom, sorry not going to be implemented for a long time.

Ramming = Ramming is crashing the mech into another mech. A mech pilot would want to do this if they are not doing enough damage and going to die. Ramming can knock both mechs over or just one depending on the weight class and max engine speed. Also, ramming does damage to both mechs. Reliable collision detection and damage not implemented yet.

Advanced Tactics (More difficult to perform)

Death From Above (DFA) = A DFA is when a mech jumps on top of another mech with the use of jump jets. (“SPACEBAR” key) It’s hard to get the timing just right but it’s just like ramming. It does damage to the enemy mech’s torso and damages the mech legs of the DFA’er. Also knocks down both of you. To make doing a DFA easier, jump off a cliff, a building, or a hill near the enemy and make sure they don’t expect that they are going to be suffering the effects of a DFA. Reliable collision detection and damage not implemented yet.

Ambushing = Ambushing is a surprise attack that can be performed by shutting down a mech in a hidden area nearby the path that other mechs will take to pass by with the “P” key. Doing this is difficult because they might change direction or find the hidden mech. It’s successful when they pass by the mech and you initiate the attack from behind them.

Spreading Damage = This is an old mech tactic that not many will mention to you. It will effectively keep you and your mech alive longer. You use all of your mechs armor to stay alive by spreading out the damage during a fight. To do this you have to pay attention to what your enemy is shooting at and what parts of your mech is facing them. You will force your enemy to shoot at the undamaged parts of your mech instead of letting them concentrate on finishing off sections of your mech.

You will notice that when you run your mech around your enemy in a clock wise circle the right side of your mech gets hit the most. When you run it counter clock wise the left side of your mech gets hit most. When you look to the sides the arms of your mech can get hit. When you jump jet into the air with “SPACEBAR” you can force them to shoot your leg armor. When you go behind a hill your legs are covered which forces them to shoot your torso. By doing this at the right time you can save your mech from being destroyed too quickly. Mechs that have center torsos that sticks out have a tougher time doing this.

Shot Disruption = This is when you mess up a mech pilots aim right before they are going to fire there shot off. Missing their first shot is really bad if they don’t hit you at all, especially, if it was an Alpha Strike. With a hard hitting weapon like an AC 20 you can mess up their aim. You can figure out the timing when they are about to fire their weapons. It’s right when they get into range and when they first see you. After that, you will need to start counting down their weapons recycle times to keep it up or chain fire (fire one after another) your hard hitting weapons. Chain Fire is now implemented.

“Chain Fire:

• To enable/disable selected weapon group (vertical highlight in weapon group readout) to use chain fire, press backspace.
• Chain fire is on when you see the weapon group number flash.
• Non flashing weapon is the next weapon to fire.” (from email MechWarrior Online BETA Update)

Destroying Battle Mechs

There are 4 ways to destroy a battle mech that a MechWarrior needs to decide on as soon as they see an enemy mech’s information.

They are:

• Destroy the cockpit of the mech. (Headshots is the fastest way to kill a mech.)
• Destroy the engine of the mech. [Located in the center torso (the Center of the mech)] If an XL engine is equipped it’s also located in the more easily to destroy left and right torsos. All three torso sections have rear armor sections protecting the back of the mech that share the same internal structure of those three torso sections. The rear armor usually has a lower amount of armor hit points to shoot through.
• Destroy all of the weapons on the mech by destroying sections of the mech that house specific weapon hard points. (Gradually nerfs the firepower of the mech.) (Potential secondary explosion damage to nearby sections if C.A.S.E. is not equipped in the sections where ammo or gauss rifles are present)
• Destroy both legs of the mech. (Crippling movement speed and maneuverability on the first leg destroyed)

(Any other equipment in the sections of the mech that are destroyed will lose functionality. Equipment can be destroyed before a section is destroyed if enough critical hits had occurred. It is more likely to lose a weapon from critical hits when it takes up a large amount of space. When left or right torso sections are destroyed the mech also looses its corresponding arm because that section is no longer there to hold the arm on to the mech.)

Now you know the four ways to destroy a battle mech. Let’s get into the reasons why you’ll pick one way over the other after you see the enemies target information at the top right of your screen after pressing the “R” key to target them.

Reasons:

• Enemy mech is at the right angle, position, trajectory, speed, distance, and size of the cockpit. ( Headshot)
• Enemy mech is easy and consistent to shoot at within a timely manner. (Center Torso)
• Enemy mech has too much firepower to deal with or too little amount of weapons. (Section of the mech that is holding the weapons)
• Enemy mech is Fast, agile, and wasting your time. (Legs)
• Enemy mech is alone and easy to maneuver around. (Rear of the Center Torso)
• Enemy mech is already damaged severely in one section. (Damaged section)

You are now armed with reason and knowledge of how to take down a battle mech. Remember to be consistent on shooting the section of the battle mech you want destroyed.

Disruption/Spoofing(in the future)

Role Warfare (Role game mechanics not fully implemented yet; content of the subject can be changed.)

Role Warfare starts right when you choose a mech. Each different battle mech offers a different play style or role to master that they fit into. If you own the Battle mech you can customize it to fit almost any play style of yours but that’s too complicated so let me point out where the average differences of each battle mech weight class fits into each play style. Then I will define the four or five roles they can full fill for your team.

Light Battle Mech Class = 20 to 35 Tons. , Very High Speed, Very High Maneuverability, Low Armor, Low Firepower, Play style is twitchy, hard to hit, and fast paced.

Medium Battle Mech Class = 40 to 55 Tons. , High Speed, High Maneuverability, Average Armor, Average Firepower, Play style is like it can handle any situation it’s placed in which makes it very flexible. (Jack of all trades, master of none)

Heavy Battle Mech Class = 60 to 75 Tons. , Average Speed, Average Maneuverability, High Armor, High Firepower, Play style is like a tactical shooter which relies more on aim, and scoot movements.

Assault Battle Mech Class = 80 to 100 Tons. , Low Speed, Low Maneuverability, Very High Armor, Very High Firepower, Play style is being the hardest to kill and imposing the biggest threat.

——————————–

Scout = The scout’s role is to immediately get information about the other team in the beginning of the match by spotting targets and telling their team where the main enemy battle groups are on the map so their team can get into positions to properly defend or attack the other team. Scouts can use the listed number and letter grids of the battle grid to report enemy locations. Scouts are not post to expose themselves to taking a lot of potential damage. Scouts need a fast mech to be able to get information quickly and escape any pursuing groups of mechs.

The preferred mech class for performing this role is a light mech.
“Suggested Modules: Radar and Detection enhancements”
“Suggested Pilot Skills: Scout class skills”

Defense = The Defense role is to defend against enemy mechs from going into or around their teammates positions so their team can concentrate on what they need to do. They must stop light mechs or any other kinds of mechs from threatening their teammates to the point where their weak rear armor is facing enemy mechs or their damage per second is slowed down.

The preferred mech class for performing this role is a medium mech.
“Suggested Modules: Assistance and Detection enhancements”
“Suggested Pilot Skills: Assistance of friendly units and Detection/Protection skills”

Support = The Support’s role is to be able to quickly engage in focus fire to increase damage per second indirectly or directly with long range weapons to assist in taking down mechs with their team on multiple battle lines. (Support roles existence is not officially stated like the other four roles in the Dev Blogs Role Warfare threads)

The preferred mech class for performing this role is a heavy mech.
Suggested Modules: (Unknown)
Suggested Pilot Skills: (Unknown)

Assault = The Assault’s role is to find favorable cover for front line positions and tactically engage the enemy team to pick them apart one at a time with the help of their team.

The preferred mech class for performing this role is a assault mech.
“Suggested Modules: Assistance and Targeting enhancements”
“Suggested Pilot Skills: Enhanced Targeting and Assistance of friendly units”

Command Role = Only one player can be the commander at a time. The Commander is in charge of organizing the team with the use of the battle grid (“B” key) and the take command button inside of the battle grid. The Commander uses a left click menu on the battle grid to set waypoints for the team or a specific lance to follow. Also in the battle grid is the legend that explains what kind of waypoints that the commander is using.

“Suggested BattleMech Class: Light/Medium/Heavy”
“Suggested Modules: Ability to call upon support units/Radar enhancements”
“Suggested Pilot Skills: Self-defense and information sharing skills”

Almost any weight class of mechs can perform these roles but might have to sacrifice strengths to become more like the preferred weight class of mechs.

Now one’s you own a mech you can start unlocking mech efficiencies, Pilot skills/modules, and customizing your mech so you can full fill one of these chosen roles or play styles a little better than you have before.

GXP is for unlocking pilot skills/modules which you earn anytime you play one of your own mechs.

XP is for unlocking mech efficiencies which you earn only for the mech that you are playing and own. Three variants of the same mech must have basic efficiencies unlocked to allow you to spend XP on elite efficiencies. Then to be able to spend XP on the master efficiencies you must unlock basic and elite efficiencies for another battle mech of the same weight class.

Specific Battle Mech Weight Class Tactics (Additional content needed)

Light Battle Mech Tactics:

• Circle back where you came from on top of hills to create a quick and limited exposure time to shoot over hills.
• Run past enemy mechs into cover to limit the amount of time you expose yourself to combat.
• Take the low and high ground to avoid torso mounted weapons on nearby enemy mechs.
• Lure nearby enemy mechs into areas where your team will have a easy time shooting them.
• Force mechs to turn around so their rear armor is facing a nearby friendly that is ready to shoot them in the back.

Medium Battle Mech Tactics:

• Circle back where you came from on top of hills to create a quick and limited exposure time to shoot over hills.
• Take the low and high ground to avoid torso mounted weapons on nearby enemy mechs.
• U-turn out and back into cover with one shot at the beginning of the turn and one shot at the end when they are able to see the front of your mech.

Heavy Battle Mech Tactics:

• At long range feint left to right of enemy mechs to dodge projectile shots.

Assault Battle Mech Tactics:

• Try to control cover by only going around cover and hills enough to engage only one mech at a time.
• Try not to use shooting over hill maneuvers because climbing up a hill as a Assault mech is far too slow to be worth the potential damage before you even get all your weapons over the hill.

Open to suggestions on this subject.

Lone Wolfing (Acting Alone)

In match made games you may be matched up with a team but that doesn’t mean team work is going to happen. People are not always going to cooperate with you and invite you to a voice chat server. For that situation, I’m going to talk about how to act alone on a team. It will be a specific way to force some team work out of them.

Stick Together = Stay relatively close to your teams main battle group. Just close enough that you are able to quickly focus fire on any targets that present themselves to attack your teammates. The best way to make sure your team sticks together is to tell you and your teammates to take baby steps. (If they understand it) Yes, baby steps taking one step at a time. It’s a staggering movement pattern that allows your team time to recheck where there teammates are and catch up so they can stick together. To take baby steps slowly move and halt behind cover while moving closer to your enemy. Your teammates will use their full speed to catch up to the group.

Priority Teaming = If your team splits up use priority teaming. Priority teaming is figuring out who you want to fight with. If you press the “Q” key information on your teammates will show up above their mechs. Use this to get to know your team quickly by recognizing what mech variants they have and how much remaining armor signified by the percentage. Knowing this can get you an idea on what kind of mech load outs they could be using. If you’re lucky your teammates will announce (if asked) what their load outs are.

Now the choice of which teammates you want to fight with should be based on how important their mechs are to your team’s success and what your mech can do for them. Lowest will be light mech/scouts, than medium mechs/defense role, than heavy mechs/support role and then the most important, assault mechs/assault role. This should help you preserve your team’s battle strength high throughout the match. If your teammates are outnumbered (even when you are there) stay far away enough for you to escape when the battle goes bad so you can regroup with other surviving teammates. (I’m looking into improving Priority teaming.)

Priority Focus Fire = Priority Focus Fire is figuring out what target or enemy mech to focus fire on to help your team take down mechs quickly just like a team with voice chat. This is very easy to do because all you need to know is what a full red triangle or a empty red triangle means on top of a enemy mech. The full red triangle means that your teammates are targeting this mech. An empty red triangle means nobody has this enemy mech targeted with the “R” key. The mech that has the full red triangle above its head is the mech to be focus fired on so target this mech and destroy it.

If your team has multiple targets locked with red full triangles call out the target to be focus fired either with the Alpha through Lima letter indicators near the locked targets triangle or any other specific information on the target.

Defending the base = It’s not ideal to leave mech warrior’s to defend the base on their own in the beginning of the match. It’s better if a group or one player is called out to intercept mechs heading to your team’s base or already trying to capture your team’s base. So use the “Q” key to look at your teammate’s information and pick which ones would be best to head back to base to intercept the base capping mechs. Say their Mech Warrior Pilot names over team chat with the “Y” key that will immediately grab their attention. If not it looks like you’ll have to be the only one going back to defend the base.

If your team is close to the enemy capture zone and there is no enemies’ insight you might be able to capture their base before they do. Remember to call out to everyone to get on the enemy base capture zone if you decide on that. Also remember that it only takes one mech inside of the base capture zone to stop a team from capturing the base for a little while.

Guerrilla Warfare = If caught alone do Guerrilla Warfare Tactics. Guerrilla Warfare is hit and run tactics where you can use ambushes, peck at them with long range weapons fire, or choke points. Choke points are areas on the map that become a tight fitting environment like a city or tunnel. You will lead your enemy or run to these locations so you can force them into a 1 on 1 fight instead of dealing with 2-3 mechs out in the open. As you run through choke points on the map make sure you force the enemy mechs to get in the way of each other’s line of sight. Fighting like this will significantly lower your chances of taking too much damage during a match. Adding speed to your mech will help with this. Good luck lone wolf.

Team Tactics and Strategies

Formations = A way for your team to concentrate their firepower and Armor. For example, if you have your team stand side by side with their mechs; your armor will be protected on the side your teammates are standing on and teammates will be able to fire on your target without you being in their line of sight. This can also be an effective way to stop the opposing team from focus firing on one of your teammate’s mechs.

Basic Formations (Thank you Charles Fornton for the Free PDF)

Circle of Death = C.O.D. is where you and your team circle strafe the enemy to blockade their escape from battle. Be careful not to shoot your teammates on the other side of the circle.

Flanking Maneuver = Flanking is not just attacking the side of an enemy team. It’s having your main force pining down there defenders while the flanking group(s) of your team moves to engage that enemy team at a different direction than your main force. This is useful for narrowing down your enemy’s movement and lowering their ability to defend themselves.

Pincer Movement = When the enemy team advances towards the center of your team a Pincer Movement can be done too immediately flank the enemy team. To do a Pincer Movement have your team divide towards the sides of the enemy teams force with reinforcement on the ends of the Pincer Movement to perform a second Pincer Movement on each side to prevent outside reinforcement of the surrounded enemy team. It’s a faster more risky way of the Flanking Maneuver.

Defeat in Detail = This is something that you will naturally see teams doing in PUG matches and have a pretty good chance at failing horribly at it. Defeat in Detail is when a large number of players are used to defeat a small amount of enemy players at a time to bring down the number of enemy team members that your team will have to deal with later on. It’s post to put your team into a low risk situation of losing its strength and eventually destroy the other team. So when you see your entire team chasing a Jenner there trying to use Defeat in Detail to make it easier for them to win the match.

Charge = Charging is having your team move as fast as it can into close range to break through enemy lines. Having your team charge is useful when you need them to get out of a bad situation like being surrounded or breaking the morale of the other team. It’s also useful at taking advantage of outnumbered players and unguarded objectives but fails at attacking defensive positions.

CONGRATULATIONS!

I congratulate you if you read and practiced all that is in this guide. There is still more you can learn about MechWarrior and its origin BattleTech so I urge you to go explore the universe. Have fun stomping your competition MechWarrior.